May 28, 2024

Twist Drill Drilling Test Conditions And Characteristics

Leave a message

  Drill Bits Manufacturers Introduce The twist drill is one of the tools with the highest wear. The semi-closed cutting environment and special drill geometry make the drilling temperature of twist drill higher than that of turning and milling under the same cutting dosage conditions, and the cutting speed of the drill edge and the friction speed between the drill edge and the cutting surface are distributed in a triangular gradient along the radial direction. Affected by this, different areas of the drill edge have different wear processes and characteristics, and with the increase of the drill speed or diameter, this difference in wear characteristics will also be intensified.

  Obviously, the overall twist drill edge wear law is more complex, if you simply follow the traditional theory and method of turning or milling tool wear to deal with the twist drill wear problem (such as only the size of the corner wear indicates the degree of wear of the drill and to develop a dull standard of the drill), on the one hand, due to the lack of comprehensive theoretical elaboration of the law of wear of the edge of the drill with the basis of the test, on the other hand, it is difficult to reasonably select the drill dosage and it is difficult to fully utilize the drill edge for the actual processing of the drill. On the other hand, it is difficult to rationally select the drilling dosage in the actual processing and give full play to the cutting effect of the drill as a whole. Especially in the automatic machining environment where multiple sizes of drills are used for simultaneous machining, it is difficult to implement the durability standard with little significance. Instead, it is easier and more reasonable to use forced tool change life management based on drill cutting failure characterization and testing.

  To this end, the automotive tempered structural steel, which is widely used in drilling, was selected and drilling tests were carried out in the common range of automatic drilling dosage, in an attempt to analyze the wear pattern of different areas of the drill edge and its trend with the drilling speed to reveal the overall wear pattern of the twist drill, and then study the effect of drilling speed on the cutting life of the drill.

Best HSSM35 Cobalt Drill Bit Fully Ground For Metal And Stainless Steel

Send Inquiry