Straight HSS drill bits performance test specification
(GB1436 — 1985)
1. Cutting standard as following:
diameter mm | Cutting speed m/min | Feeding length mm/r | Drilling depth mm | Number of holes | diameter mm | Cutting speed m/min | Feeding length mm/r | Drilling depth mm | Number of holes |
~ 2.0 | 30 | 手动 | 6 | 15 | >6.0~8.0 | 28 | 0.20 | 25 | 30 |
>2.0~2.5 | 7 | 40 | >8.0~10.0 | 0.25 | |||||
>2.5~3.0 | 9 | >10.0~12.0 | 0.28 | 30 | 20 | ||||
>3.5 | 10 | >12.0~14.0 | 0.32 | ||||||
>3.5~4.0 | 12 | >14.0~16.0 | 0.36 | ||||||
>4.0~4.5 | 28 | 0.13 | 14 | 30 | >16.0~18.0 | 0.40 | 35 | ||
>4.5~5.0 | 0.15 | 16 |
>18.0~20.0
| 0.43 | 40 | ||||
>5.0~6.0 | 0.17 | 20 |
Remark:
1. When the speed and feeding length of the machine are not in conformity with this standard, the feeding length per minute should be no less than the number calculated by the standard.
2. test material should be 45# or 50# steel which heat treatment. The hardness is HB170-200. The side of hole should be pre-process and perpendicular to the center line of the machine spindle.
3. cooling liquid should be emulsified oil.
4. Drilling blind hole

